Synrad FH FLYER, Руководство оператора

Страница: 113 / 250

stand-alone
operation
SYNRAD FH Series Flyer Operator’s Manual Version 3.4
11 3
Configuration
Error=0xC0 0x40
# Set mask to specify inputs used for file selection. In this case, read inputs IN3 – IN0.
FileMask=0x0F
# Now for the mark files.
# With four inputs (IN3 – IN0) we can make 16 discrete matches; however, we will
# not use the 0 state where IN3 – IN0 are all “0” because this could indicate
# the inputs are disconnected or otherwise unavailable. We want to ensure that only
# an active input state causes lasing to occur.
# Remember path and filenames are case sensitive!!
File=1 /markfile1.mkh
# “/” symbol indicates that file resides in the Filestore’s root directory.
File=2 /markfile2.mkh
File=3 /Folder1/markfile3.mkh
# markfile3 resides in Folder1 in the Filestore.
File=4 /Folder2/subfolder1/markfile4.mkh
File=5 /network/markfile5.mkh
File=6 /network/markfile6.mkh
# markfile5 and markfile6.mkh reside on a network share connected via
# FH Flyer’s Ethernet port.
File=7 /markfile1.mkh
# A match to “1” or “7” marks the same file (markfile1.mkh) – this is OK!
# or File=0x01 /markfile1.mkh; File=0x02 /markfile2.mkh; etc.
File=8 /network/markfile7.mkh
File=9 /markfile8.mkh
# Because there are only nine valid matches, input states 0 and 10–15 will not match.
# These “no match” states are caught by the NullFile command keyword, so Flyer
# will loop without marking until a valid match occurs.
# End of file.