Chapter 4: Maintenance and Expansion
21
d
Push back the tab to secure the newly inserted card.
Note:
Make sure the connector is fully inserted. Otherwise, the network interface
card might not be able to function properly.
4
Put back the top cover you lifted in step 2.
a
Align the round dots at the side of top cover with the slots on the chassis’
edge, and push the top cover back in position.
b
Fasten the two screws you loosened in step 2-a.
Add a RAM Module to the RackStation
The optional Synology RAM module is designed for RackStation memory
expansion. Follow the steps below to install, check, or remove a RAM module
on your RackStation.
To install the RAM module:
Note:
Once you add a RAM module to either of your RackStation units in a HA
cluster (if created), you must add another RAM module of the identical model to
the other RackStation.
