10
Chapter 2: Hardware Setup
2
Install drives:
•
For 3.5” drives:
Place the drive in the drive tray. Turn the tray upside
down and tighten screws into the four spots indicated below to secure the
drive.
•
For 2.5” drives:
Place the drive in the drive tray. Turn the tray upside
down and tighten screws into the four spots indicated below to secure the
drive.
3
Insert the loaded drive tray into the empty drive bay.
Note:
1. Make sure the tray is pushed in all the way. Otherwise, the drive might not be
able to function properly.
2. The HA cluster with RackStation RC requires at least
three
drives in
the expansion unit(s) to operate normally.
