15
Installing the Thoracic Supports
To assemble the two (2) thoracic supports, you will need to:
1. Loosen the two (2) central knobs on the backrest
A
using the 5/16 hex (Allen)
key. Do not remove them entirely (Fig.19).
2. Slide the thoracic support slats between the central knob screws
A
(Fig. 20).
3. Retighten the knobs using the 5/16 hex (Allen) key.
4. Repeat for the other thoracic support.
5. Reinstall the protective backplate,
securing it into place with the tightening
knob (Fig. 14).
Installing the Abduction Supports
(Small Size)
The Growth Kit supplied with the SEGO
Seating System includes two (2) sizes of
abduction supports. Select the size that best fits the user.
To complete the assembly of the
small-sized
abduction supports, you
will need to:
1. Unscrew tightening knob
A
(already installed at time of delivery)
(Fig. 21).
2. Insert the screw on the abduction support into slot
B
(Fig. 21).
3. Retighten plastic knob A on the screw.
4. Repeat for the other abduction support.
To complete the assembly of the
large-sized
abduction supports, you will need to:
1. Unscrew the tightening knob
A
(already installed at time of delivery) (Fig. 22).
2. Insert the two (2) screws on the abduction support into slot
B
(Fig. 22).
3. Retighten the plastic knob
A
on the screw (Fig. 23).
4. Repeat for the other abduction support.
Содержание SEGO
