PRX-40B
15
6.
Access cards configuration
Time Out
After every entry a LED is lit (while waiting for the next entry). After the LED goes out the unit exits the
“Programming Mode” and resets (action must be repeated from the beginning).
6.1
Management of Access Cards (authorized personnel)
Managing access Cards can be performed three ways:
Using Keyboard - Keying-in the keyboard the card number
Using Card - Swiping the card
By Index - Enables deleting an employee without a card
Using the Keyboard
Build list:
After entering set-up mode key-in code 22 (key-in card number to list) (Up to 13 characters in Linear
decoding) and key-in all relevant cards. After each keyed-in card number 2 short beeps will indicate that
the number was registered successfully. After keying-in all card numbers press 7&8 simultaneously (man-
datory) (press
Enter
in terminals that consist of an
Enter
key) in order to revert to normal mode.
Note:
In operation mode 4 - card and pin code, the user must key-in the card number and then key-in the
pin code for each card (4 digit code).
Delete list:
After entering set-up mode key-in code 23 (Delete card by keyboard) and key-in all irrelevant cards. After
each keyed-in card number 2 short beeps will indicate that the number was deleted successfully. After key-
ing-in all card numbers press 7&8 simultaneously (mandatory) (press
Enter
in terminals that consist of an
Enter
key) in order to revert to normal mode.
Using Card
Build list:
After entering set-up mode key-in code 20 (Insert card to list by card) and swipe all relevant cards. After
each swiped card 2 short beeps will indicate that the number was registered successfully. After swiping all
cards press 7&8 simultaneously (mandatory) (press
Enter
in terminals that consist of an
Enter
key) in
order to revert to normal mode.
Note:
In set-up code 12: operation mode no. 4 - card and pin code, the user must swipe the card and then
key-in the code (a 4 digit code).
Delete list:
After entering set-up mode key-in code 21 (delete card by card) and swipe all irrelevant cards. After each
swiped card 2 short beeps will indicate that the number was deleted successfully. After swiping all cards
press 7&8 simultaneously (mandatory) (press
Enter
in terminals that consist of an
Enter
key) in order to
revert to normal mode.
Note:
Whenever a task is completed successfully, a LED flashes and the buzzer beeps.
By index
Insert cards:
After entering set-up mode, key-in code 24 (Insert card by Index) and key-in a 4 digit index, swipe card. 2
short beeps will indicate that the number was registered successfully. After swiping all cards press 7&8
simultaneously (mandatory) (press
Enter
in terminals that consist of an
Enter
key) in order to revert to
