Snap Connect E10 Overview
Chapter 1: Introduction
Easy-To-Use Technology
600034-01A
SNAP Connect E10 User Guide
Page 9
Easy-To-Use
Technology
For many applications, the E10 requires little or no setup. The E10 ships pre-configured to:
Use DHCP to learn its IP address.
Automatically participate in any SNAP Network that is on the
matching radio type,
radio rate, radio channel, network ID
, and encryption settings.
Automatically accept incoming TCP/IP connections from other devices running SNAP
Connect.
User configuration is only required if you want to change from these default settings, or if
you want to connect to additional networks over TCP/IP.
Key Features
Key features of the E10 include:
32-bit RISC architecture
400 MHZ CPU
256 MB flash, expandable through external USB drives
64 MB RAM
10/100 Mb Ethernet port
USB 2.0 (host) port
micro-USB serial port
Small form factor
Rugged metal case
Internal Synapse SNAP Engine with external antenna
Shipment
Includes
Your E10 shipment includes the following:
SNAP
®
Connect E10 unit
Power adapter
Micro USB cable
Mounting ears