User’s Manual
Synaccess Networks, Inc.
www.synaccess-net.com
(760) 930 – 0473 Page 21 of 46
Figure 13 - Control Command Help Menu
************************************************************
* *
* *
* Help Menu *
* *
* *
************************************************************
>
>
apVbs n Displays AutoPing run-time info(0-disable,1-enable)
cs n Displays AC current draw Status(1-display, 0-erase max value).
date Displays current date
emailvbs n Displays emailing run time info(0-disable,1-basic,2-detailed)
emailget Starts email reading immediately
emailsend Sends a test email message immediately
ecmd Sets email command delimitor(Select: &,-,+,~,$,*,>,|,<, or ?)
ftpget ip id pwd fileName - Get system data file from a FTP server.
ftpput ip id pwd fileName - Put system data file to a FTP server.
login *Enters user login
logout *Exits current login
datalog Executes data logging(0-logging off; 1- on; 2-read; 3-clear)
mac Displays Ethernet port Mac address
nwset Restarts Ethernet network interface
nwshow Displays network Status
ping *Pings a host. E.g.: ping 192.168.0.1, or ping yahoo.com
prsv n *Reserves power outlet #n for current login user
pset n v *Sets power outlet #n to v(value 1-on, 0-off)
psetd n v s *Sets power outlet n to v(value 1-on, 0-off) with delay s sec.
ps v Sets all power outlets to v(value 1-on, 0-off)
pshow *Displays power outlet status
pTmshow Displays power outlet timer information
punrsv n *Unreserves power outlet n from current login user
rb n *Reboots power outlet n
rbd n s *Reboots power outlet n with delay s seconds.
rbt s *Sets reboot duration to s seconds (s > 0).
setup Starts system configuration menu
sshow Displays console ports configuration status
sysshow Displays system information
time Displays current time
usershow Displays all users
whoami Displays current login user
ver Displays hardware and software versions
! Repeats previous command
***Note - if Restricted Access Mode is on, non-Admin users are limited
to use commands marked with "*"
.
>
