User’s Manual
Synaccess Networks, Inc.
www.synaccess-net.com
(760) 930 – 0473 Page 25 of 46
Option 5 - Configure Power Outlet:
Enters Power Outlet Setup submenu.
Helpful info: control command “pshow” displays all power outlet current status.
control command “ptmshow” displays all power outlet timer settings.
Option 6 - Setup new or existing accounts:
Enters User Account Setup submenu. Select this option if you need to create new account, change
existing account, and delete existing account and reserve power outlets and serial console ports.
Helpful info: control command “userlist” displays all account names.
Option 7 – Reload Factory Defaults:
Reloads to factory default settings. You must login at Administration level.
Option 8 – Save settings:
Save current system configuration parameters.
Option 9 – Quit:
Returns to previous menu.
5.3 System Access Setup Menu:
Figure 17 - System Access Setup Menu (Terminal Screen)
************************************************************
* *
* *
* System Access Setup *
* *
* *
************************************************************
>
> 1) System(Device) name...............Undefined
2) Date(mm/dd/yyyy)..................03/07/2007
3) Time(hh:mm:ss)....................00:58:36
4) Serial port mode..................Console
5) MODEM startup string..............ATE0M0Q1&C0&D0S0=1
6) Non-Admin user restriction*(Y/N)..N
7) Web access (Y/N)..................Y
8) TELNET enable (Y/N)...............Y
9) TELNET timeout(max 65535 minutes).10
10) TELNET anonymous user (Y/N).......Y
11) Command control via email(Y/N)....N
12) SNMP agent enable(Y/N)............N
13) SNMP Community String ............******
14) SNMP Trap (1-on 0-off)............0
15) SNMP Trap Receiver IP Address.....
s) Save.
q) Quit.
***Note for 6): for controlling non-Admin user's access to system data.
>Please enter your selection:
