User’s Manual
Synaccess Networks, Inc.
www.synaccess-net.com
(760) 930 – 0473 Page 27 of 46
Enable Telnet Anonymous User
Enable or disable an anonymous user’s access to Telnet port.
Control command via Emails:
Enable or disable this access method. When it is enabled, you need to make sure you also
have completed POP/SMTP server and email receiving and sending addresses. See “TCP/IP
Network Configuration” setup menu for detailed information how to setup email accounts.
Default to disable.
SNMP Agent Enabling:
Enable or disable SNMP agent on the system. If the system SNMP Agent is enabled, it
collects and stores management information and makes this information available to NMS
using SNMP. Please see Section 2.5 for a list available MIB objects that the system supports.
Default to disable.
SNMP Trap Enabling:
Enable or disable Trap sending. If this option is enabled, Traps are sent if there is a power
reboot command execution on the system. Default to disable.
Note: you must enable the above
SNMP Agent
setting. Otherwise, enabling Trap setting will
not take effect.
SNMP Trap Receiver IP Address:
Enter Trap Monitoring receiver IP address.
SNMP Community String:
To specify SNMP MIB/Trap community string. The default string is “public”. This string is
used for public, private and Trap.
Current Alarm Threshold:
To defined AC current draw alarm threshold. The unit is Amps.
Alarm Email Notification:
Enable or disable Email alarm sending method.
Alarm Notification Interval (Minute):
Define alarm notification sending interval.
Save and Quit:
Save current configuration data and return to previous configuration menu.