User’s Manual
Synaccess Networks, Inc.
www.synaccess-net.com
(760) 930 – 0473 Page 28 of 46
5.4 TCP/IP Network Configuration Menu:
This is a submenu of System Main Menu.
Figure 19 - Network Configuration Menu (Terminal Screen)
Obtain IP using DHCP:
Enable or disable DHCP. The purpose of using DHCP (
Dynamic Host Configuration
Protocol
) is to assign dynamic IP addresses to a computer or a network device on a network.
There must be a DHCP server on a network running and the server must permit an assigned
computer or network device to be on the LAN. If this option is disabled on the NP systems,
the system will not send DHCP requests to a network.
Fallback to static IP (if DHCP server no offer):
Define a static IP address. If DHCP is disabled on the system, there is no DHCP server
running on a network, or a DHCP server refuses IP offering, you have the option to whether
either allow the system to use a static IP address or not.
Static IP Address:
A static IP Address is an IP address that never changes. This IP address will be used if a
DHCP server IP has no IP offered or DHCP automatic IP address is disabled.
************************************************************
* *
* Network Configuration Menu *
* *
************************************************************
>1) Obtain IP using DHCP...................Y
2) Fallback to static IP(if DHCP failed)..Y
3) Static IP Address......................192.168.1.100
4) Subnet Mask............................255.255.255.0
5) Gateway IP Address.....................192.168.1.1
6) Set DNS Server IP Manually (Y/N).......N
7) Primary DNS IP Address.................0.0.0.0
8) Secondary DNS IP Address...............0.0.0.0
9) HTTP Port number(default 80, see note).80
10) Telnet Port Number(default 23).........23
11) POP3 Port Number(default 110)..........110
12) SMTP Port Number(default 25)...........25
13) POP3 Email Server......................Undefined
14) SMTP Email Server......................Undefined
15) Incoming Email Account Name............Undefined
16) Incoming Email Password................******
17) 2nd outgoing(replying) Email Address...
18) Outgoing Email Authentication..........Y
19) Checking Email Interval(Minute)........2
20) Access Control List(ACL) Enable (Y/N)..N
21) Network Connection Check Using This IP..
[Leave 21) blank if Gateway IP is used. Applicable to AutoPing Mode.]
s) Save.
q) Quit.
Note - Requires system reboot, if the parameter changes.
Please enter your selection: