Symmetron Stylitis-10, Руководство по установке

Страница: 43 / 46

STYLITIS-10 INSTALLATION GUIDE [0516]
43
Click Channels
8’s line and select ‘Digital Output active low’.
Open the channel’s node and right-click the CONDITIONS line. Open an OR line. If
you repeat, more OR lines open.
Right-click the OR line to open an AND If you repeat, more AND lines open, for the
specific OR line.
This way, you can create a combination of ANDs and ORs, which, if satisfied, the
output becomes low (the switch closes).
By clicking an AND line, you may give a value to the control channel. You may click
the channel to select it and the comparison operator to select above, below, between
or not between. Finally, click the value to type the one you wish.
In order to save the changes, click
‘Write Setup’ in the ‘Setup’ tab, in the ‘Data logger
online’ bar on the left. If you wish to change the setup of multiple channels, one
‘Write Setup’ in the end is enough.