manualshive.com logo in svg

Symetrix 610, Руководство пользователя, Страница: 4 / 22

Поделиться
Скачать
Symetrix 610 Скачать руководство пользователя страница 4

Page 2

Safety Information

Operator safety summary

The information in this summary is intended for persons who operate the equipment as well as

repair personnel. Specific warnings and cautions are found throughout this manual wherever they

may apply; they do not appear in this summary.
The notational conventions used in this manual and on the equipment itself are described in the

following paragraphs.

Equipment markings

The lightning flash with arrowhead symbol

within an equilateral triangle is intended to

alert the user of the presence of uninsulated

"dangerous voltage" within the product's

enclosure that may be of sufficient magni-

tude to constitute a risk of electric shock to

persons.
The exclamation point within an equilateral

triangle is intended to alert the user of the

presence of important operating and mainte-

nance (servicing) instructions in the litera-

ture accompanying the 610 (i.e. this

manual).

CAUTION

WARNING:

ATTENTION:

RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR

S’adresser a un reparateur compétent.

THIS EQUIPMENT TO RAIN OR MOISTURE

ELECTRIC SHOCK DO NOT EXPOSE

TO REDUCE THE RISK OF FIRE OR

No user serviceable parts inside. Refer servicing to qualified service personnel.

Il ne se trouve a l’interieur aucune piece pourvant entre reparée l’usager.

DO NOT OPEN

RISK OF ELECTRIC SHOCK

Caution

To prevent electric shock, do not use the polarized plug supplied with the 610  with any extension

cord, receptacle, or other outlet unless the blades can be fully inserted to prevent blade exposure.

Terms

Several notational conventions are used in this manual. Some paragraphs may use Note, Caution,

or Warning as a heading. These headings have the following meaning:
Note

Identifies information that needs extra emphasis. A Note generally supplies extra

information to help you to better use the 610.

Caution

Identifies information that, if not heeded, may cause damage to the 610 or other

equipment in your system.

Warning

Identifies information that, if ignored, may be hazardous to your health or

that of others.

In addition, certain typefaces and capitalization are used to identify certain words. These are:
CAPITALS

Controls, switches or other markings on the 610's chassis.

Boldface

Strong emphasis.

2

Содержание 610























Отзывы:

Нет отзывов