manualshive.com logo in svg

Symetrix 610, Руководство пользователя, Страница: 12 / 22

Поделиться
Скачать
Symetrix 610 Скачать руководство пользователя страница 12

Page 10

purposely holds down the DUMP PROFANITY button.  Holding down the button would erase

the two seconds from memory and mute the output of the 610 until the DUMP PROFANITY

button is released.  This provides a "panic button" function for use if all hell breaks loose.  The

muting function does not activate when the DUMP PROFANITY button is pushed and quickly

released.
After a DUMP PROFANITY command the 610 automatically reenters the START DELAY mode

and the delay memory begins accruing until the full 7 1/2 seconds are achieved.
Alternatively, the 610 can be set up so that only 3 3/4 seconds of memory are deleted the first

time the button is pushed, thereby maintaining a 3 3/4 second reserve. This allows the host to

bring another caller on air right away without having to wait for the memory to build up from

zero. As in the case of the full 7 1/2 second dump, if the 610 has accrued only two seconds in

memory when the DUMP PROFANITY button is pushed, the host will have only two seconds of

protection and the program will be on-the-air at real time. The 610 offers the host extra protection

in the form of muting if he purposely holds down the DUMP PROFANITY button.  Holding

down the button would erase the two seconds from memory and mute the output of the 610 until

the DUMP PROFANITY button is released.  This provides a "panic button" function for use if

things get too crazy.  The muting function does not activate when the DUMP PROFANITY

button is pushed and quickly released.
See Appendix C (Default Configuration) for details on how to select between full memory dump

or partial (3 3/4 second) dump.

The DELAY TIME (SECONDS) display

As explained on the previous page, the DELAY TIME LED display indicates the time duration of

the program audio in the 610's memory at any instant. If the 610 has been manually placed in

BYPASS mode, or if the delay memory is zero seconds as a result of the EXIT DELAY function,

all DELAY TIME LEDs will be off. The display is calibrated in .5 second intervals from zero to 7

1/2 seconds.

Lamp Functions

The following summarizes the functioning of the front panel push-button lamps (and correspond-

ing remote panel LEDs, if used) while the 610 is in OPERATE mode.

COUGH

DUMP PROFANITY

START DELAY

EXIT DELAY

FLASH

 - delay time decreasing

SOLID ON

 - delay is zero, unit bypassed

OFF

 - all other times

FLASH

 - delay time increasing

OFF

 - all other times

SOLID ON

- full 7.5

seconds of delay

achieved

SOLID ON

 - while button pressed

OFF

 - all other times

FLASH 

 - for 5 seconds after

                  button has been pressed

OFF

 - all other times

Содержание 610























Отзывы:

Нет отзывов