symbios logic J21971S-0398, Руководство по установке

Страница: 55 / 86

Completing the Installation
Configure the System
Revision A, March 1998 Installation Instructions 45
Configure the System
Tools/Equipment
You will need the following items:
●
Software materials shipped with the command module (or
separately)
●
Configuration worksheet showing how you want to set up the
disk array
Important Note Some default software parameters (such as RAID level, drive
groups, and caching) are set at the factory prior to shipment. Before
you attempt to store data on your system, you should use
SYMplicity Storage Manager to determine the current status and
configuration of your system, and to re-configure it as required. For
detailed instructions on configuring the disk array, refer to the
SYMplicity Storage Manager software documentation.
Instructions
Use this procedure as a guideline for installing the disk array
management software and for configuring the controllers and
drives.
1 Check the shipping containers that came with the command
module for software materials.
This shipment may have included: software installation diskettes or
CDs, plus documentation.
●
Shipment included software material: continue at Step 2 .
●
Shipment did not contain software material: go to Step 3 .
2 Install the SYMplicity Storage Manager software.
Refer to the appropriate SYMplicity Storage Manager manual for
instructions on using the software.
3 Configure the system.
Use the SYMplicity Storage Manager software to configure the
controllers and drives as necessary. Refer to the appropriate
SYMplicity Storage Manager manual for instructions on using the
software.