symbios logic J21971S-0398, Руководство по установке

Страница: 32 / 86

Installing the Rackmount Command Module
Connect the Interface Cables
22 MetaStor Command Module Installation Guide Revision A, March 1998
4 Install the Fiber Channel controllers ( Figure 10 ).
Take care not to pinch or bend the Fiber Channel cables. Move the
cables out of the way (to the left or top) and slide the controller CRUs
into the slots. Lock the CRUs it in place.
5 Connect the Fiber Channel cables ( Figure 10 ).
Attach one Fiber Channel cable to the front of each controller CRU.
Connect the other end of each cable to the appropriate Fiber Channel
device.
6 Replace the battery CRU ( Figure 8 on page 19 ).
Slide the battery CRU into the slot and tighten the captive screws.
Next, go to
Step 8 on page 24
Figure 10 Installing the Fiber Channel Cable
-
"
.
/
0
1 !23
$
* ! $
4
5
$