symbios logic J21971S-0398, Руководство по установке

Страница: 27 / 86

Installing the Rackmount Command Module
Mount the Command Module in the Cabinet
Revision A, March 1998 Installation Instructions 17
Figure 7 Chassis Mounting on Support Rails
4 Replace all of the CRUs that you removed in Step 1 on page 10 .
Reverse the instructions shown in Figure 4 on page 11 to install the
controllers, controller fan, battery, power supplies, and power supply
fan into the chassis. As you install the CRUs, make sure that you:
●
Use care when handling the and installing the CRUs
●
Lock all CRUs securely in place
●
Keep the Fiber Channel cables out of the way when inserting
the controller CRUs (if applicable)
Note The power supplies are interchangeable, so you can insert them
in either slot.
5 Replace the power supply and fan CRUs.
Reverse the instructions shown in Figure 4 on page 11 to install the
controller fan, power supplies and power supply fan CRUs. Do not
install the battery or controller CRUs at this time.
6 Go to “Connect the Interface Cables” on page 18
End of Procedure
!'(
!
!
!
)