17
8. USE OF EACH COMPONENT
FUEL TANK CAP
Mode: JET 50 . MASK 50
1. Insert ignition switch key into the lock on the fuel
tank cap cover, and turn the key to the right, then the
cover can be removed.
2. Turn the fuel tank cap to the left, then the cap can be
removed.
3. Do not fill above the fuel upper limit when refueling.
4. Align the “ ” mark
△
:
On the cap with the “ ” mark on the body
△
pinpoint,
and turn the cap to the right. That means the cap is
locked.
5. Close the fuel tank cap cover, and turn the ignition
key to the left, then the cover can be locked.
Mode: RS-21 50
1. Insert ignition switch key into the lock on the fuel
tank cap, and turn the key to the right, then the cap
can be removed.
2. Do not fill above the fuel upper limit when refueling.
3. Align the “
△
” mark
4. on the cap with the “
△
” mark on the body, and press
down the cap in parallel until a “click” sound is heard.
That means the cap is locked (the ignition key now
turns back to the left slightly). To remove the ignition
key, simply turn the key to the left and then remove
it.
Mode: DD 50
1. Insert your key into the ignition switch, turn it to the
left, the fuel tank cap can be lifted up.
2. Press the fuel tank cap down and push it locks
automatically.
WARNING:
y
Use caution when refueling!
Keep lit cigarettes and other flames away from the scooter
and fuel source!
y
To refuel: 1) Shut off engine, 2) Set scooter up on main stand, 3) Open fuel tank cap by turning
cap counter clockwise, 4) Fill fuel tank.
y
Do not fill fuel tank above upper limit of fuel tank when refueling. If fuel tank is overfilled, fuel will
flow out through a hole on the fuel tank cap. This could result in a fire and/or damage to the
scooter.
y
Make sure the fuel tank cap has been properly tightened after refueling and before riding the
scooter.
Pinpoint
“
” mark
△
Pinpoint
“
” mark
△
Ignition switch
Fuel tank cap
