14
8. USE OF EACH COMPONENT
OPERATION OF IGNITION SWITCH
(D.D. 50)
“ON” position
y
Engine can be started in this position.
y
Ignition switch key can not be removed.
“OFF” position
y
Engine is shut off and can not be started in this position.
y
Ignition switch key can be removed.
“FUEL CAP OPEN” position
y
To unlock, simply turn the key from “OFF” to “FUEL
CAP OPEN”.
“LOCK” position
y
Turn the handle all the way to left, then press down the key and turn the key to the “LOCK”
position on the left.
y
In this position, the handle is locked and the key can be removed.
y
To unlock, simply turn the key from “LOCK” to “OFF”.
“SEAT OPEN” position
y
When engine stop: Without taking out the key from ignition switch, push down the key and
turn right.
y
When engine running: Without taking out the key from ignition switch, turn the key to right.
USE OF BUTTONS
CAUTION:
y
Never turn the ignition switch key when the scooter is running. Turning the key to either “
OFF
”
or “
LOCK
” position will shut off the electrical system and could result in an accident.
y
Only turn the ignition switch key to the “
OFF
” position after the scooter has been completely
stopped.
y
If the ignition switch key remains in the “
ON
” position for a prolonged period after the engine
has been stopped, the battery capacity will be reduced and this may affect the engines ability to
start.
y
Lock the steering handle and remove the key before leaving the scooter. Do not leave the key
in the ignition switch when leaving the scooter.
IGNITION SWITCH
SEAT
OPEN
Engine Stop switch
Electrical
Starter Button
Horn Switch
High / Low
Beam Switch
Turn Signal
Switch
