15
8. USE OF EACH COMPONENT
•
Engine Stop Switch
“ON”:
Switch to this position and the engine can be started.
“OFF”:
Switch to this position to turn off the engine when a state of emergency.
y
Electrical Starter Button
This is the electrical starter button, it is used for starting the engine.
When the ignition switch key turns to “ON” and brake lever hold, and then press this button
down to start engine.
《
This mechanism is designed for safety. Thus, the front or rear brake lever must be hold
before using this button so that engine can be started.
》
y
High/Low Beam Switch
This is the high and low beam of headlight switching switch. Press this switch to switch between high
and low beams.
This is for high beam.
This is for low beam. (Please turn to low beam when riding in city)
y
Turn Signal Switch
Turn signal lights are used when turning left/right or changing lane.
Turn ignition switch to “ON”, and slide the turn signal switch to left or right. Then, the turn signal lights
will flash.
Right-side turn signal light flashing means you intend to make a right turn.
Left-side turn signal light flashing means you intend to make a left turn.
y
Horn Switch
Press this button down when ignition switch is in the “ON” position, the horn will sound.
CAUTION:
y
Release the starter button immediately after engine has been started. Do not press the starter
button while engine is running. Doing so could cause serious engine damage.
y
Make sure the headlight and turn signal light are in the “OFF” position when starting the
engine.
NOTICE:
y
Do not press the horn button when you are in the no horn area.
CAUTION:
y
If the scooter is stopped with the ignition switch in the ”
ON
” position and the engine stop switch
in the “
OFF
” position, the taillight will still be on, resulting in battery discharge.
