Sygonix 2380479 Скачать руководство пользователя страница 6

Страница: 6 / 36

5. Safety information

Damage caused due to failure to observe these instructions will void the warranty. We shall not be

liable for any consequential damage!
We shall not be liable for damage to property or personal injury caused by incorrect handling or

failure to observe the safety information! Such cases will void the warranty/guarantee.

General information

•

This product is not a toy. Keep it out of the reach of children and pets.

• Protect the product from extreme temperatures, impacts, flammable gases, vapours and solvents. The

access system is intended for installation and operation in indoor and outdoor areas (IP66). Neverthe-

less, the enclosed IR remote control must not be allowed to get damp or wet.

•

Handle the product carefully. Jolts, impacts or a fall even from a low height may damage the product. Do

not place the product under any mechanical stress.

•

Do not mount or connect the product when it is connected to a power supply.

• Never exceed the contact rating for the changeover contact specified in the ‘Technical data’. Never

switch the mains voltage, as this can cause life-threatening electric shock!

•

Always observe safety information and operating instructions for the other devices (e.g. door opener,

alarm system) to which the product is connected.

•

If it is no longer possible to operate the product safely, stop using it and prevent unauthorised use. Safe

operation of the appliance can no longer be guaranteed if it shows visible signs of damage, malfunctions,

has been exposed to unfavourable storage conditions or significant transport loads.

•

For installations in industrial facilities, follow the accident prevention regulations for electrical systems

and equipment issued by the national safety organisation or the corresponding national authority.

•

Do not leave packaging material lying around carelessly. It may become a dangerous toy for children!

• Maintenance, modifications and repairs must be carried out by a technician or a specialist repair centre.
•

If you are not sure how to operate the product correctly, or if you have any questions that are not an-

swered in these operating instructions, contact us or another specialist.

Содержание 2380479





































Результаты поиска

Содержание 2380479

Отзывы:

Похожие инструкции для 2380479

Бренды по названию

Популярные бренды

Sygonix 2380479, Руководство по эксплуатации

Результаты поиска

Содержание 2380479

Отзывы:

Похожие инструкции для 2380479

Бренды по названию

Популярные бренды