Sygonix 2380479 Скачать руководство пользователя страница 18

Страница: 18 / 36

Deleting the user transponder

The respective user will no longer have access and the corresponding user transponder can be deleted. Deletion is

possible either via the user transponder or the memory number.

The master transponder or the master fingerprint can also be used to delete a user transponder.

1) Deletion of a user transponder with the IR remote control:

• Start programming mode as outlined in 8. a) so that the LED flashes red.
•

Enter programming code to start deletion mode. The LED lights up yellow.

•

There are 2 different ways to delete:

- Hold the user transponder a short distance in front of the RFID sensor. If the transponder is recognised, the

access system emits a short beep and the transponder is deleted.

- Enter the memory number of the user transponder (e.g.

) and confirm it with the

button. The

transponder is then deleted.

Another user transponder can then be deleted as described above.

If the user transponder is unknown (or already deleted), the access system emits 3 quick beeps and the

LED flashes red.

•

Exit deletion mode with the

button. The LED flashes red again. You can now carry out further programming or

exit programming mode with the button.

2) Deletion of a user transponder with the master transponder or the master fingerprint

•

Hold the master transponder 2x in succession a short distance in front of the RFID sensor or touch 2x with the

master finger on the fingerprint sensor. The LED indicator lights up yellow.

•

Hold a user transponder a short distance in front of the RFID sensor. Once a registered user transponder is recog-

nised, the access system emits a short beep and the user transponder is deleted.

If the user transponder is unknown (or already deleted), the access system emits 3 quick beeps and the

LED flashes red.

•

If additional user transponders are to be deleted, proceed as outlined, hold them in front of the RFID sensor.

•

To end the deletion process, hold the master transponder 1x in front of the RFID sensor or touch 1x with the master

finger on the fingerprint sensor. The LED then lights up red and the access system is in standby mode again.

Содержание 2380479





































Результаты поиска

Содержание 2380479

Отзывы:

Похожие инструкции для 2380479

Бренды по названию

Популярные бренды

Sygonix 2380479, Руководство по эксплуатации

Результаты поиска

Содержание 2380479

Отзывы:

Похожие инструкции для 2380479

Бренды по названию

Популярные бренды