Sygonix 2380477, Руководство по эксплуатации

Страница: 17 / 32

17
2) Pairing a user transponder with the master transponder
This pairing procedure enables quick and easy pairing of new user transponders in the next free memory
cell. However, a specific user transponder that is defective or lost can only be deleted via the transponder
number and not via the memory cell number, as the memory cell number to which this specific user tran
-
sponder is assigned is unknown.
•
Hold the master transponder once in front of the RFID sensor. The access system will emit a short beep and the
yellow LED will light up.
•
Hold a user transponder once in front of the RFID sensor. Once a new transponder is recognised, the access
system emits a short beep and the transponder is saved.
Optionally, you can also enter the 8- or 10-digit transponder number and confirm the entry with the
button.
When user transponder pairing is complete, the access system emits three brief beeps and the LED flash
-
es red. The same user transponder cannot be paired more than once.
•
If desired, you can pair other transponders by holding them in front of the RFID sensor, one at a time (optionally,
you can enter the 8- or 10-digit transponder number and confirm with the
button).
• Hold the master transponder in front of the RFID sensor to finish the pairing process. The access system will emit
a short beep, the red LED will light up and the access system will go back to standby mode.