• Press the key to select the desired method. The code lock
will emit a short beep and the LED indicator (2) will briefly
turn green.
• Press the key to exit programming mode. The LED
indicator (2) will turn red again. The code lock is now in
standby mode.
11. Access settings
The additional programming settings depend on the selected
access mode. Select the programming method for your selected
access mode. (See section 10 "d) Programming the access
mode".)
Pay attention to the access mode when setting up
users and transponders. This determines the individual
programming steps for the code lock.
12. Programming access with a tran-
sponder or transponder or PIN
code
These programming steps only apply for the transponder (
) and transponder or PIN code (
) access modes.
Refer to "Selecting the access mode" for more information.
24
Содержание 2299889
Страница 307: ......