Sygonix 2299889, Руководство по эксплуатации

Страница: 35 / 308

• Enter the new user PIN code and confirm your entry with the
key.
• Repeat the entry of the new user PIN code and confirm your
entry with the key. The code lock will emit a beep. The
LED indicator (2) will briefly turn green.
13. Retrospectively changing tran-
sponders and user PIN codes
These programming steps should be used if you have set the
access mode to Trans User PIN code ( ). Refer
to the "Selecting the access mode" for more information.
14. Programming the "Transponder
and PIN code" access mode
The programming steps in these section only apply if you have
set the access mode to transponder and user PIN code (
).
Linking a user transponder with a user PIN code:
Enter a user ID. This must consist of the numbers 0 to 989.
Note down the user ID, as it can be assigned later. To add a
user transponder with a manually assigned user ID, proceed as
follows:
35