Sygonix 2299889, Руководство по эксплуатации

Страница: 20 / 308

• We therefore recommend that you also assign a user ID for
each user PIN code and transponder that you want to add to
the code lock.
• The user ID should be recorded in a list together with
other data (employee name, access via user PIN code or
transponder).
• Some of the 1000 available user IDs are reserved for
special functions: e.g. . These are designed for
linking user PIN codes with transponders in order to ensure
maximum security and combine both codes.
• User PIN codes and user transponders can be saved to
specific user IDs.
• Any standard EM transponder which works with a transponder
frequency of 125 kHz can be used as a transponder.
b) Entering/exiting programming mode
To enter programming mode, you need to enter the master code
using the keypad. By default (default factory settings or after a
reset), the master code is "123456".
In the following programming examples, "123456" is
used as a master code.
Change the master code as soon as possible – no later
than when you have finished the programming steps.
20