Food Waste Bio-Digester
operator
manual
REVISION: 09/2014 | page 14 of 16
SERVIC
VERLOADED
REPLAC
LUID
WAIT
ULL
RUNNING
RESTART
5.3 SUMMARY OF SIGNALS ON LED DISPLAY
5.3.8
Heater pad failure.
Machine will continue to
run in normal operating
condition, but contact
Mechline or your authorised
service agent.
5.3.1
5.3.2
5.3.5
5.3.4
Normal operating
condition.
Warming-up.
Please WAIT
20 minutes.
The machine is in
‘ENERGY-SAVING’
mode.
Open and close the lid to
return the appliance to
normal operating condition.
Change fluid box.
NOTE:
If the bio-fluid is not replaced
within 72 hours of the alarm sounding,
the BLUE light will turn to a solid light
and will not extinguish until the fluid
box is replaced. See Section 5.2.7.
OR
5.3.3
Lid left open
warning.
Close the lid to
revert to normal
operating condition.
5.3.6
Rotor jammed by hard
object OR machine
overloaded with food waste.
NOTE:
See Sections 5.2.8 and 9.
5.3.7
Overflow in machine sump.
Isolate machine
from power supply.
Lock machine lid. Turn off
water supply to machine.
Contact Mechline or your
authorised service agent.
(while
machine
lid is
closed)
5.3.9
Motor overheated.
Turn off machine and leave
for 1 hour before restarting.
Follow re-start advice in
5.2.15. If problem persists,
contact Mechline or your
authorised service agent.
5.3.10
Machine top chamber has
flooded.
Isolate machine
from power supply.
Lock machine lid. Turn off
water supply to machine.
Contact Mechline or your
authorised service agent.
5.3.11
Fault in air break tank.
Turn off machine and restart.
Follow re-start advice in
5.2.15. If problem persists,
contact Mechline or your
authorised service agent.
5.3.12
Emergency stop button
activated OR power supply
cut. Attempt to restart, see
re-start advice in 5.2.15.
If machine will not restart,
contact Mechline or your
authorised service agent.
ALL FUNCTIONS
DEAD