SWS ALUMTIG 20 Скачать руководство пользователя

Страница: 2 / 26

THANK YOU FOR YOUR PURCHASE OF THE ALUMTIG™ 200 Digital TIG/MMA

WELDING SYSTEM.

At SWS, we take pride in the professional quality, innovation, and support we deliver to our customers and

the welding industry as a whole. The ALUMTIG

™

200 is the next step in our progression as the new standard

in welding and cutting products delivered fast marking the continuing evolution of SWS. This welding

machine is the latest development in inverter technology. It has been tested and approved by production

welders and the best fabricating professionals in the industry.

Providing better outcomes through innovation and new product creation have been staples of SWS since

its inception. It is the very principle by which we do business. Our goal has always been to provide an

outstanding product that not only stands out from the competition but also reflects the quality we strive

for in every aspect of our business philosophy. From our second to none customer service excellence to

technical support, we work hard at what we do so that you can too.

We know you will enjoy using this machine!

The ALUMTIG

™

200 is manufactured and compliant with AS60974.1:2006, IEC60974.10, CE

Guaranteeing you electrical safety and performance.

CAUTION!: The ALUMTIG

™

200 Operating Manual has been designed to instruct you on the proper use and

operation of your SWS product. Your satisfaction with this system and its safe operation is our primary

concern. It is important to take the time to read the entire manual, especially the safety sections. They will

help you to avoid potential hazards that may exist when working with this product.

™

Содержание ALUMTIG 20



























Результаты поиска

Содержание ALUMTIG 20

Отзывы:

Похожие инструкции для ALUMTIG 20

Бренды по названию

Популярные бренды

SWS ALUMTIG 20, Руководство по эксплуатации

Результаты поиска

Содержание ALUMTIG 20

Отзывы:

Похожие инструкции для ALUMTIG 20

Бренды по названию

Популярные бренды