Manual Version 1.3 - June/2017
3
ALUMTIG 200
ALUMTIG 200
WARNING
Arc welding and plasma cutting can be dangerous to yourself and others. Take special care when
welding and cutting. Note your employer’s safety practices which should be based on manufacturers’
hazard data documents.
ELECTRIC SHOCK - Can kill
‑ Connect and earth (ground) the welding or plasma cutting unit adhering to applicable standards.
‑ Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.
‑ Insulate yourself from the natural ground and the workpiece.
‑ Ensure your working stance is safe.
FUMES AND GASES - Can be dangerous to health.
‑ Keep your head out of the fumes.
‑ Use ventilation, extraction at the welding or cutting arc, or both, to take fumes and gases away
from your breathing zone and the surrounding area.
ARC RAYS - Can injure eyes and burn skin.
‑ Protect your eyes and body. Use an approved welding/plasma cutting helmet and filter lens and
wear protective clothing.
‑ Protect bystanders with suitable screens or curtains.
FIRE HAZARD
‑ Sparks (spatter) can cause fires. Make sure therefore that there are no flammable materials
nearby.
NOISE - Excessive noise can damage hearing.
‑ Protect your ears. Use ear muffs or other suitable hearing protection.
‑ Warn all bystanders of the risk.
MALFUNCTION - Call an for expert assistance in the event of a malfunction.
CAUTION
This product is only intended welding. Any other use may result in personal injury and
equipment damage.
CAUTION
Read and understand the instruction manual before installing or operating.
SAFETY
2.0 Hazards
