SWR ENGINEERING SOLIDFLOW, Руководство по эксплуатации

Страница: 20 / 32

Operating Instructions
20
3.7 Trim 4 mA
Value of current min.
Adjust to the external measuring system
(if display differs).
With and adjust fast, with and
adjust slowly the current to 4 mA.
With transfer the entry and leave the menu level, with leave the menu
without any change.
3.8 Trim 20 mA
Value of current max. Adjust to the external
measuring system (if display differs).
With and adjust fast, with and
adjust slowly the current to 4 mA.
With transfer the entry and leave the menu
level, with leave the menu without any change.
4. Calibration
With and select according to your
significance, with leave the menu
without any change, with switch to
a deeper menu level.
4.1 Calibration Factor
Global calibration factor of the measuring
on the display and as well the output range
from 0.01 to 9.99 - Setting is 1.0
With set the value to 0.0 to start enter the
numbers of the measuring range, with
transfer the entry and leave the menu level.
4.2 Calibration Filter
Damping filter for setting unsteady signals
during the calibration.
(Has no effect on output and display)
0.1 to 999.9 s
With set the value to 0.0 to start enter the
numbers of the measuring range, with
transfer the entry and leave the menu level.
4.3 Number of
Calibration Points
Set the number of the auxiliary points:
2 ... 5 points.
With set the value to 0.0 to start enter the
numbers of the measuring range, with
transfer the entry and leave the menu level.
.
<<
8 C
Analog Out
Trim 4.0 mA
C
<< < > >>
8
>>
<
>
<<
8
C
>> <
>
Analog Out
Trim 20.0 mA
C
< < > >>
8
8
Calibration 7 8 9
Cal.-Factor
4 5 6
1.0
1 2 3
C
0
8
8
C
8
C
C
Calibration 7 8 9
Filter
4 5 6
1.0 s
1 2 3
C
0
8
Calibration 7 8 9
Segment Points
4 5 6
2
1 2 3
C
0
8
C
8
£ ¤
4. Calibration
£
4.1 Cal. Factor 1.0
¤
4.2 Filter 0.1 s
4.3 Aux. Points 2
C
4.4 Calibration
8
1.0