SWIT Electronics FM-24DCI, Руководство пользователя

Страница: 40 / 53

Signal Source for
Main Picture
\ Signal Source for
Slave Picture
SDI1 SDI2 LINE1(CVBS) LINE2(CVBS) LINE2(Y/C) LINE2(YPSPR) HDMI
SDI2
      
LINE1(CVBS)
      
LINE2(CVBS)
      
LINE2(Y/C)
 
   

LINE2(YPBPR)
   
 

HDMI
     


Position for signal source menu
: The input signal information of the main
picture displays at the top left corner of the screen, and the one of the slave
picture displays at the top right corner of the screen.

Settings for signal source : Press INPUT button to set the signal source for
the main picture, and select
CONFIG

SUB IN TYPE
item to set the signal
source for the slave picture.
H FLIP MODE
The input signal has been inverted horizontally by a mirror type in H FLIP Display mode.
Select the menu item CONFIG

H FLIP to be set to ON , or enable H FLIP in its coalesced
Function Key in Function Key menu, thus to inverse the images horizontally.
The display result in the Horizontal FLIP MODE is as shown in Figure 5.1-31:
Figure 5.1-31 Horizontal Flip Mode

H FLIP mode does not effect on Waveform/Vector, that is, the Wave Form of the input signal
in H FLIP mode will not be inversed horizontally.
AUTO STANDBY
The Auto Standby mode is used to set the status of the monitor when the Power button is turned
on or off.