SWIT Electronics FM-24DCI, Руководство пользователя

Страница: 29 / 53

Figure 5.1-16 DISPLAY SETUP Menu
The relationship of Items, Default Value, Domain Range and Description of the sub-item is as
shown in Table 5.1-5:
Table 5.1-5 The Description of DISPLAY SETUP Menu Items
Items
Default
Value
Domain Range Description
STATUS
DISPLAY
AUTO OFF/ON/AUTO
Set whether to display Status
information, including the resolution
and frame rate of the source.
AFD DISPLAY OFF OFF/ON
Set whether to activate AFD
information.
ON is an effective value to AFD
DISPLAY item only if the value of
STATUS DISPLAY is AUTO or ON.
WFM FORM
TYPE
OFF

MODE1: WAVE
FORM+ VECT75

MODE2: WAVE
FORM+ VECT100

VECT100

VECT75

WAVE FORM

OFF
Switch the display mode among
mode1, mode2, vector100, vector75
and wave form.
When the wave form is selected, it will
display the wave form, and when the
vector* is selected, it will display the
color component of the image signal.
WFM
OVERLIMIT
100 50~100 Set the over limit of wave form.
WFM
UNDERLIMIT
0 0~50 Set the under limit of wave form.
WFM TRANS OPAQUE

OPAQUE

TRANS1: the
transparency is 25%
Set the transparency of the wave
form/vector