SWIT Electronics FM-24DCI, Руководство пользователя

Страница: 39 / 53

Figure 5.1-29 Position of WFM and Audio Meter in PBP Mode
Set Display Mode
The display mode on the screen could be single( SUB IN TYPE is OFF), PBP, PIP, set as
instructed below:
OPERATION
Method 1 : Set By menu item
Select the Config

SUB IN TYPE item, use ENTER , UP or DOWN key to select a display
mode among OFF , PBP and PIP .
Method 2 : Set By function key
Designate PBP function to a function key, then press this function key to switch it value
among
OFF
,
PBP
and
PIP
.
For example, Select the FUNCTION KEY

F1 item, and set its value as PBP , as shown in
Figure 5.1-30 , then, press F1 to switch the display mode.
F1 PBP PBP
F2 OFF NATIVE
FUNCTION
F3 4:3 ANAMORPHIC
F4 OFF FLASE COLOR
F5 OFF FREEZE
Figure 5.1-30 Set the Function Key as PBP

Scope for the signal source of the slave picture
The selection scope of the signal source for the slave picture will be changing in accordance
with the main picture's source, the available formats are as shown in Table 5.1-9:
Table 5.1-8 The Relationship of the Signal Source for Slave Picture and Main
Picture
Signal Source for
Main Picture
\ Signal Source for
Slave Picture
SDI1 SDI2 LINE1(CVBS) LINE2(CVBS) LINE2(Y/C) LINE2(YPSPR) HDMI
SDI1
      