SWIT Electronics FM-24DCI, Руководство пользователя

Страница: 30 / 53

Items
Default
Value
Domain Range Description

TRANS2: the
transparency is 50%
TRANS3: the
transparency is 75%
WFM
POSITION
LEFT

LEFT: Left bottom

RIGHT: Right bottom
Set the displayed position for wave
form/vector.
TIME CODE OFF

OFF

D-VITC

LTC

VITC
Set whether to display time code, and
set the time code display mode.
STATUS INFORMATION
Set DISPLAY

STATUS DISPLAY item to be ON or Auto, it will display the Status Information bar
at the top left corner of the screen, and it displays the input channel and signal format.
The status information will be displayed only 15 seconds, then it will be closed automatically when
STATUS INFORMATION item is set to be AUTO.
SDI1
1080I59.94
Source
Signal Format
The Signal Format usually displays as the following situations:

UNKNOWN : appears if an unsupported signal is input.

NO SIGNAL : appears if no signal is detected.

Normal: the signal format is displayed as 1080i59.94, NTSC, or 1280X1024,
etc. when the input is supported by the monitor.
Particularly, When the monitor is set in PIP or PBP mode by setting the CONFIG

SUB IN TYPE
menu item, the Status Information for the main picture displays at the top left corner of the
screen, and the Status Information for the slave picture displays at the top right corner of the
screen.
Set DISPLAY

STATUS DISPLAY item to be OFF to completely turn the Status Information off,
and it will effect on the AFD information display.
AFD (Active Format Description) INFORMATION
If activate the AFD information, the embedded aspect ratio signal and AFD code in the video
signal will be extracted and displayed as an AFD marker at the top center of the screen.
Make sure you have set the DISPLAY

STATUS DISPLAY item to be ON or Auto, before you
switch DISPLAY

AFD DISPLAY item to be ON.