Swisscom Rousseau 300, Руководство пользователя

Страница: 41 / 48

39
20406039en_ba_e0
Faults and trouble-shooting
Not every malfunction results from a defect in your telephone. Sometimes you only need
to briefly interrupt the flow of electricity (unplug the power supply and plug it in again)
or remove and re-insert the batteries in the handset and check that all cables are con-
nected properly (router, base, handset and charger). The following guidelines will help
you solve some problems.
Symptom
Nothing is displayed on the
screen.
Handset does not react to any
key being pressed
Handset registration was not
successful
Solution
• The display went into power save mode after a
period of inactivity. Press any key to activate the
display.
• Batteries are empty. Recharge or change batteries.
• Keypad lock is activated, turn it off.
• Repeat registration and make sure that you have
installed a base station first.
• Check the system PIN of your base station ("Easy
Register handset" is using 0000 as system PIN).
• In case you use Swisscom Rousseau 10: Press and
hold down paging key long enough (approx. 10 s).
• Handset is out of range of the base. Move closer
to the base.
Software update
See chapter "Important information".
IP address
You can view detailled information about your IP settings.