Swisscom Rousseau 300, Руководство пользователя

Страница: 12 / 48

10
20406039en_ba_e0
Setting the language
When the batteries have been inserted for the first time the language choice appears.
1. Press to scroll to the desired language (default setting on delivery is German).
2. Confirm with OK .
The display texts are now displayed in the selected language.
Installation assistant
After having selected the language, the handset will automatically switch to registration
mode.
1.
PRESS AND HOLD PAGING KEY ON THE BASE
appears. Press and hold down the pag-
ing key on the base station for a few seconds until white light starts blinking on the
base.
2. Release the paging key. If the registration is successful the handset is automatically
assigned a handset name (e.g.
INT1
). If the registration is not successful, repeat the
procedure.
3. If you have more than one IP line: After successful registration you can directly select
the incoming line(s) the handset is attached to and the default outgoing line for your
handset.
Note
• To register your handset you must install a base station first!
• If you interrupt the registration for a while, the registration menu will disappear (dis-
play turns off automatically). Place the handset back into the charger: the menu reap-
pears.
• Refer to chapter "Settings / Registration" for further information.