Special functions
82
KAP13.FM5
Pronto 32i, englisch: A30853-X300-F507-1-7619
20.5.99
Area code
The area code (code for connections in the same local net-
work) is required for aligning the directory numbers re-
ceived and recorded via CLIP/COLP.
You can set the area code of your ISDN connection.
Frequency signalling (FO signalling)
When a connection is set up, you can use the keypad to
transmit FO signals (tones in dual-tone multifrequency),
e.g. to control an answering machine.
Prerequisite: A connection is established.
Keypad signalling
Instead of DTMF signalling, keypad information elements
(IE) can also be transmitted, e. g. in order to call up CEN-
TREX features (
➔
page 83).
Because DTMF signalling is the default setting for
Pronto 32i, it must first be deactivated. To do this, pro-
gram a feature key (
➔
page 83) with the function "24=DT-
MF signals off?".
Condition: a line has been seized, a connection set up, or
an existing connection has not yet been cleared down.
>
Service?
? >
2=configuration?
?
o
and
?
With password protection (
➔
page 14): Enter the pass-
word.
o
Enter the local area code (e.g. 0171 for London) (max. 7
digits). Backspace with
<
.
?
Save the setting.
>
18=area code?
?
The area code is only relevant for the "Italian" na-
tional variant.
o
Enter the control digits. The digits entered are preceded
by a "D" on the display.
Press the programmed feature key "DTMF signals off?" .
o
Enter control codes. The digits entered are shown on the
display.
DTMF signals off?
