Putting the system into operation
9
KAP03.FM5
Pronto 32i, englisch: A30853-X300-F507-1-7619
20.5.99
Step 5 (only with PBX operation): Program the trunk code
If you are operating your Pronto 32i on a telecommunica-
tions system (private branch exchange), you must pro-
gram a trunk code in accordance with the configuration of
the system.
Step 6: Try out the telephone
You can now try out your Pronto 32i!
To call a subscriber:
To call yourself:
Press the
?
key.
Keep pressing key
>
until the national code which you
require appears.
Press the
?
key.
Press
h
when finished.
Press the
>
key until the lower display line shows:
Press the
?
key.
Press the
>
key until the lower display line shows:
Press the
?
key.
Press the
>
key until the lower display line shows:
Enter the trunk code using the keypad, e.g. 0 (depending
on your telecommunications system). Then press
?
.
Press
h
when finished.
Service?
>
2=configuration?
>
15=external call?
>
c
Lift the handset.
o
Enter the directory number.
The number is dialed.
c
Lift the handset.
o
Enter the directory number.
The number is dialed.
The entry appears in your call list.
