Programming the telephone settings
14
KAP05.FM5
Pronto 32i, englisch: A30853-X300-F507-1-7619
20.5.99
Programming the telephone settings
Password
You can define a password to protect against unauthor-
ized settings on your telephone. The password is a 4-digit
PIN. The following telephone functions can then only be
activated after the password has been entered correctly:
●
Configuration,
●
Call charge management,
●
Barring functions,
●
Direct station selection (Babyphone).
Call processing type
The following settings are possible:
●
1 = Main station
. If you were assigned MSNs by
Swisscom, this is the correct call processing type.
Several devices with the same or different MSN can
be connected to a main station, whereby calls be-
tween these devices are liable for charges.
●
2 = Extension CENTREX (CTX)
. In principle, this call
processing type is the same as the main station. The
only difference is that an additional signalling mode
(keypad) is released so that additional CENTREX fea-
tures of other network providers can be used. For in-
formation on the control sequences, please refer to
the description of the network provider.
>
Service?
? >
3=local functions?
? >
2=password?
?
o
Enter the password. Backspace with
<
.
?
Save the password. "Confirm password" appears on the
display. The password must be entered a second time for
it to take effect.
o
Re-enter the password. Backspace with
<
.
?
Save the password.
When you are entering the password, the digits
you input are represented on the display as
symbols only, for security reasons.
If you enter an incorrect password, you will re-
ceive an error message. If you have forgotten
your password, intervention is required. Forget-
ting your password is synonymous with losing a
key. In this event, please contact Swisscom.
