50
Faults and self-help with troubleshooting
Aton CL315/CLT315 HS / Swisscom EN / A31008-M2156-F151-1-2X19 / appendix.fm / 06.07.2009
Ve
rs
ion 4,
16
.09.
2005
Faults and self-help with
troubleshooting
Not every problem signifies a fault in your
telephone. In some cases, problems can
be resolved by briefly interrupting the
power supply to the base station (unplug
the power supply unit and then plug it in
again) or removing the battery cells from
the handset and reinserting them. The fol-
lowing information is designed to help
you with specific problems.
Important: Some problems or faults can
only be resolved if you take the complete
device (base station, handset and connec-
tion cable) to the place of purchase.
Anmelde- oder Verbindungsprobleme mit
einem Bluetooth Headset.
¥
Reset am Bluetooth Headset durchführen
(siehe Bedienungsanleitung Ihres Head-
sets).
¥
Anmeldedaten im Mobilteil löschen, indem
Sie das Gerät abmelden (
The display is blank.
1. The handset is not switched on.
¥
Press and
hold
the end call key
a
.
2. The battery is empty.
Charge the battery or replace it
Not all menu items are displayed.
The menu display is Simplified (
standard
mode
).
¥
Activate Complete menu display (
expert
mode
No Base
flashes on the display.
1. The handset is outside the range of the
base.
¥
Move the handset closer to the base.
2. The base's range is reduced because Eco
Mode is activated.
¥
Deactivate Eco Mode (
reduce the distance between the hand-
set and the base.
3. The base is not switched on.
¥
Check the base power adapter.
Please register handset
flashes on the display.
Handset has not been registered with the base
or has been deregistered.
¥
Register the handset (
Handset does not ring.
1. The ringtone is deactivated.
¥
Activate the ringtone (
2. Call divert set for "All Calls".
¥
Switch off call divert.
3. The phone only rings if the phone number
has been transmitted.
¥
Switch on the ringtone for anonymous
calls (
The other party cannot hear you.
You have pressed the mute button
h
.
The handset is "muted".
¥
Unmute the microphone (
You hear an error tone when keying an
input
(a descending tone sequence).
Action has failed/invalid input.
¥
Repeat the operation.
Watch the display and refer to the user
guide if necessary.
Exclusion of liability
Some displays may contain pixels
(picture elements), which remain acti-
vated or deactivated. As a pixel is made
up of three sub-pixels (red, green,
blue), it is possible that pixel colours
may vary.
This is completely normal and does not
indicate an error.