9
First steps
Aton CL315/CLT315 HS / Swisscom EN / A31008-M2156-F151-1-2X19 / starting.fm / 06.07.2009
Ve
rs
ion 4,
16
.09.
2005
Setting up the charger
The charger is designed for use in dry rooms in a temperature range of +5°C
to +45°C.
Place the charger on a level, non-slip surface or mount it on the wall
The phone's feet do not usually leave any marks on surfaces. However, due to
the multitude of different varnishes and polishes used on today's furnishings,
the occurrence of marks on the surfaces cannot be completely ruled out.
Please note:
u
Never expose the telephone to the influence of heat sources, direct sunlight
or other electrical devices.
u
Protect your telephone from moisture, dust, corrosive liquids and fumes.
Connecting the charger
Please note
Pay attention to the range of the base.
This is up to 250 m in unobstructed outdoor areas and up to 40 m inside
buildings. The range is reduced when Eco Mode (
page 36) is activated.
¤
Plug the power adapter into the plug
socket
2
.
¤
Connect the flat plug from the power
adapter
1
.
To disconnect the plug from the charger,
press the release button
1
and disconnect
the plug
2
.
1
2
1
2