51
Appendix
Aton CL315/CLT315 HS / Swisscom EN / A31008-M2156-F151-1-2X19 / appendix.fm / 06.07.2009
Ve
rs
ion 4,
16
.09.
2005
Approval
This device is intended for use within the
European Union and Switzerland. If used
in other countries, it must first be appro-
ved nationally in the country in question.
Country-specific requirements have been
taken into consideration.
Swisscom hereby declare that this device
meets the essential requirements and
other relevant regulations laid down in
Directive 1999/5/EC.
The Declaration of Conformity can be found on
the following website:
under the heading "Online Shop", Telephones,
Conformity Declaration.
Bluetooth
ò
Qualified Design Identity
The Bluetooth QD ID for your Aton CL315/
CLT315 is B015360.
Appendix
Caring for your telephone
¤
Wipe the base, charger and handset
with a
damp
cloth (do not use solvent)
or an antistatic cloth.
Never
use a dry cloth as this can cause
static.
Contact with liquid
If the handset should come into contact
with liquid:
1.
Switch the handset off and remove
the battery immediately
.
2. Allow the liquid to drain from the hand-
set.
3. Pat all parts dry, then place the handset
with the battery compartment open
and the keypad facing down in a dry,
warm place
for at least 72 hours
(
not
in a microwave, oven etc.).
4.
Do not switch on the handset again
until it is completely dry.
When it has fully dried out, you will usu-
ally be able to use it again.
!
