10
First steps
Aton CL315/CLT315 HS / Swisscom EN / A31008-M2156-F151-1-2X19 / starting.fm / 06.07.2009
Ve
rs
ion 4,
16
.09.
2005
Setting up the handset for use
The display and keypad are protected by plastic films.
Remove the protective films!
Inserting the batteries and closing the battery cover
Warning
Use only rechargeable batteries recommended (
page 52), i.e., never use
a conventional (non-rechargeable) battery, as this could result in significant
health risks and personal injury. For example, the outer casing of the batter-
ies could be damaged or the batteries could explode. The phone could also
malfunction or be damaged as a result of using batteries that are not of the
recommended type.
¤
Insert the batteries
with the polarity in the
correct direction.
The polarity is indi-
cated in/on the battery
compartment.
¤
First insert the battery
cover at the top
a
.
¤
Then press the cover
b
until it clicks into place.
To open the battery cover, for
instance to replace the batter-
ies, insert a coin into the cav-
ity on the left-hand side of the
casing, then pull the battery
cover in an upward direction.