18. Apply silicone sealant to the joints
on the outside of the shower enclosure
only, as indicated by the thick line in
Fig.18.
Note: If the silicone is applied to the
inside of the enclosure as well, it can
cause the wate r to remain trapped and
build up, eventually causing leaks.
Note: Do not use the shower enclosure
for at least 24 hours in order to allow
the silicone sealant to cure fully.
12
Care & Use
·
Soapy water is adequate to keep the glass clean, although glass cleaner can be
used if required. Scourers, abrasives and chemical cleaners can damage the
glass and pattern, and should not be used.
·
In hard water areas, insoluble lime salts may be deposited on the glass. If this is
allowed to build up it becomes increasingly difficult to remove and looks
unsightly. Regular cleaning will minimize this effect.
Fig.18
24h
Corner Entry Shower Enclosure
Assembly Instructions
Watersmith UK Ltd.,BA22 8RT.
