Tools Required (not supplied)
Picture
Description
Picture
Description
Spirit
Level
Cross-Head
#2 (6mm) Screwdriver
Power Drill (with hammer action)
Rubber
Mallet
Silicone
Sealant
Tape
Measure
Pencil
6mm Drill Bit suitable for type
of wall fixings to be used
3mm HSS Drill Bit
Scissors or Knife
2
Before You Start
·
WARNING
: Please read these instructions through carefully before you start the
installation. Incorrect product installation may result in serious product failure in use.
Always follow the instructions and retain them for future use.
·
The enclosure is designed to allow for 20mm adjustment when fitted to "out of true
walls".
·
The thickness of the tiles used will affect the overall position of the enclosure on the
tray.
·
When you are ready to start, make sure you have the right tools to hand,
plenty of space and a clean dry area for assembly.
·
Two people are required for assembly. Please note that although these
instructions are comprehensive, it is always recommended that a technically
competent installer should undertake installation.
·
Ensure that the enclosure is fitted to a level tray or floor and vertical walls.
·
Please note:
The wall plugs included with this product are suitable for solid walls
only. Plasterboard or stud walls may require specialized fixings which are not
provided. (Always ensure that the wall plugs or fittings are correct for the wall type.)
·
Caution:
Please handle all glass with care. Any damage to the edges, or
scratches to the surface that occur during assembly or normal use can cause
the glass to break suddenly. Tempered glass will shatter into very small pieces
that will still have sharp edges.
·
Caution:
Care should be taken when drilling into walls to avoid hidden pipes or
electrical cables.
·
When working near a tray or bath, ensure that the waste is covered so that small
parts do not fall down it.
Corner Entry Shower Enclosure
Assembly Instructions
Watersmith UK Ltd.,BA22 8RT.
