Fig.6
M
7a. Connect the top and bottom tracks
together using the track connectors (G).
See
Fig.7-1.
7b. Use a 3mm HSS drill bit to drill
through the pilot holes on the tracks
into the track connectors (G), taking
care not to drill too far and mark the
outer surface of the track. See
Fig.7-2.
7c. Secure the tracks using screws
ST4x12mm (L) and screw cap washers
(H1) and cover with screw caps (H2).
See
Fig.7-3.
6a. Using a 3mm HSS drill bit, drill
through the pilot holes in the top and
bottom of the fixed panel seal profile,
through the splash seal (K), into the
top and bottom tracks. See
Fig.6
.
Note: Take care when drilling so as not
to drill too deep and mark the outer
surface of the top and bottom tracks.
6b. Secure the fixed glass panel to the
top and bottom tracks using screws
ST4x16mm (M). See
Fig.6.
G
B2
B1
Fig.7-1
Fig.7-2
B1
B2
B2
B1
G
B2
B1
H1
H2
L
H2
L
H1
Fig.7-3
Fig.7
Fig.7-1
Fig.7-2
Fig.7-3
6
Corner Entry Shower Enclosure
Assembly Instructions
Watersmith UK Ltd.,BA22 8RT.
