Swift 2005 MH, Руководство пользователя, Страница: 96 / 108

Equipment Details
- Use talcum powder (4 times yearly) to
care for the rubber seals
- Clean the blinds only with water and mild
soap suds
- The guarantee becomes null and void if
these instructions are not followed.
THE OMNIVENT (12V)
ROOFLIGHT
The Omnivent is a double glazed rooflight
constructed from a synthetic ultra-violet
screened material. Its side operating
mechanism allows a completely free central
opening with built-in fixed ventilation when
closed.
Red Switch = Mode of Operation
Induction (IN)
Expel (OUT)
Black Switch = Speed Control
1, 2 and 3
Omnivents give no fixed ventilation when set
on induction.
SHOWER
When using the shower, always ensure that
the shower curtain is fully drawn thus
avoiding water spray on unprotected areas.
12V READING LAMP
Care should be taken when making
directional adjustment, metal lamps when in
use become very hot.
94
Omnivent Rooflight
IN
OFF
OUT
OMNISTEP SLIDE-OUT STEP
OPERATION
- The OMNISTEP is operated by the lever
switch.
- Check if the step is retracted before
departure.
MAINTENANCE
Dirt and frost can prevent the step from
operating properly. In this case the rails and
moving parts should be cleaned or defrosted.
IN CASE OF ELECTRIC BREAK DOWN
If the step does not retract by the motor
- Remove the front plate of the step. (Fig. 1)
- Remove the connection between the
footboard and the arms (with screwdriver
and wrench S10). (Fig. 2)
- Slide out the footboard.
- Reinstall the front plate.
CURRENT DRAWN
- Working current: 5 A
- Blocking current, when fully extended or
retracted: 14 A