Swift 2005 MH, Руководство пользователя

Страница: 80 / 108

78
Equipment Details
5. When the flame lights, the sparking stops
automatically and the lamp stops
flashing.
6. Keep the knob (C) depressed for another
10-15 seconds to activate the flame
failure device, then release it.
If the lamp starts flashing again, repeat steps
4-6.
To terminate gas operation, turn the knob (A)
to "OFF" position.
230V operation
Before taking the refrigerator into operation,
check that the voltage stated on the data
plate is the same as the main voltage in use.
• Turn the thermostat knob (D) to its
highest (coldest) position.
• Set the energy selector (A) to position "AC"
12 V operation
Only operate your refrigerator on 12 V when
the engine of the vehicle is running - other-
wise your battery will soon be discharged.
• Set the energy selector (A) to position "DC"
REGULATING THE TEMPERATURE
It will take a few hours for the refrigerator to
reach normal operating temperature. We
therefore suggest you start it well in advance
of a trip and if possible store it with pre-
cooled foodstuffs.
On 230V operation and LP gas operation the
refrigerator is controlled by a thermostat and
the thermostat knob (D) should be set at 3-5.
If a lower (colder) temperature is desired, set
the thermostat to a higher figure.
On 12 V operation the refrigerator works
continuously.
STOVES HOBS, GRILLS AND
OVENS
PLEASE READ THE MANUFACTURER’S
INSTRUCTIONS BEFORE OPERATING THE
APPLIANCE
WARNING: When you are cooking it is
essential to provide additional ventilation
such as opening windows near the grill,
cooker and oven.
WARNING: When using cooking or
heating appliances, surfaces and handles
may become hot. Care should be taken
and if necessary hand protection used.
WARNING: Extra care should be taken
when accessing the locker above the hob
especially whilst the hob is in use.
Always be aware when opening the
locker door objects could fall out onto
cooking pans causing injury.
BURNER IGNITION
The hotplate lid must be open for the
hotplate, grill or oven burners to ignite.
The ignition should not be operated for more
than 15 seconds. If, after 15 seconds the
burner has not lit, stop operating the ignition,
open the compartment door and wait at least
1 minute before attempting to ignite the
burner.
In the event of the burner flames being
accidentally extinguished, turn off the burner
control and do not attempt to re-light the
burner for at least 1 minute.
SPARE PARTS
When ordering spare parts, please give the
following information so the appliance can be
correctly identified:
1. The name of the appliance from the facia,
and its colour.
2. The model number and the serial number
of the appliance (from the data badge).
BE SAFE - NOT SORRY
Warning: Good ventilation is essential to the
continuing safe operation of all gas
appliances. Do not allow any ventilation
openings to become accidentally or
deliberately blocked.
Keep all flammable materials (such as
curtains, furnishings, towels and clothing)
away from the appliance.