Swift 2005 MH, Руководство пользователя

Страница: 30 / 108

ELECTRICITY
As with electricity in the home, care must be
exercised when handling mains electricity.
Your attention is drawn to the following
notice as laid down by the Institute of
Electrical Engineers.
INSTRUCTIONS FOR ELECTRICITY
SUPPLY
On arrival at site
1. Before connecting the motorhome
installation to the mains supply,
check that:
(a) the mains supply is suitable for
your installation and appliances,
ie whether it is AC or DC and
whether it is at the correct voltage
and frequency, and
(b) your installation will be properly
earthed. Never accept a supply from a
socket outlet or plug having only two
pins, or from a lighting outlet.
(c) any residual current device (earth
leakage circuit breaker) in the mains
supply to the motorhome has been
tested within the last month.
In case of doubt, consult the site owner
or his agent.
2. MAKE SURE THAT THE SWITCH AT THE
SITE SUPPLY POINT IS OFF.
3. Lift the cover of the electricity inlet
provided on the motorhome, and insert
the connector of the supply flexible cable.
4. Remove any cover from the socket outlet
provided at the site supply point, and
connect the plug at the other end of the
supply flexible cable to this. Switch on
the main switch at the site supply point.
On leaving site
5. Switch off the main switch at the site
supply point and remove the flexible
cable connector replacing any cover
fitted.
6. Disconnect the flexible cable from the
motorhome.
IT IS IMPORTANT THAT THE MAIN
SWITCH AT THE SITE SUPPLY POINT
SHOULD BE SWITCHED OFF, THE SUPPLY
FLEXIBLE CABLE DISCONNECTED, AND
ANY COVER REPLACED ON THE SOCKET
OUTLET AT THE SITE SUPPLY POINT
BEFORE DISCONNECTING THE FLEXIBLE
CABLE FROM THE MOTORHOME. IT IS
DANGEROUS TO LEAVE THE SUPPLY
SOCKET OR SUPPLY FLEXIBLE CABLE
LIVE.
Connecting Services
28