SPEED LIGHT
Sports Timing System
7
See fig 1.
fig.1
2.4 Connecting the Gates
All connections are made via simple modular RJ type connectors (insulation
displacement type) using a standard connection throughout all available
peripherals.
You will notice two sockets on the rear of each timing light. Both of these are
functionally identical and are used for parallel connection or “daisy chaining”
of timing gates when in Lap Mode.
E.G.
Simply connect a cable from the Single Lane input on the Timing Module to
the first Timing light, connect another cable at the first Timing light and plug
the other end of this cable into the second Timing light and so on. This
procedure can be repeated for up to 10 Gates over 200m of cabling.
The versatility of the SPEED LIGHT system means that it is not necessary to
