Swift Sports SPEED LIGHT Скачать руководство пользователя

Страница: 29 / 31

SPEED LIGHT

Sports Timing System

•

START-GUN Sensor /Siren (optional)

The Start-Gun Sensor is a very versatile device. In this small unit we have

managed to combine three important functions related to starting timing.

Starting-Pistol sensing

Connect the supplied microphone and attach the other end to the starting

pistol. Connect a cable from the Auxillary Start input on the timing module to

the Start-Gun Sensor. By doing this power is now connected to the sensor and

you will see a RED Led flashing. This indicates that the device is in ‘Sample”

mode and is reading the microphone input in order to store the maximum it

“hears”. So….load the starting pistol and “BANG”. Press the RED switch to

store this value.The Start-gun Sensor will now use 70% of this noise level as a

thresh-hold . This system entirely eliminates flase triggering. From this point on

, operation of your starting pistol will send a “START” signal to the timing

module.

Electronic Siren Starting

Included with the Start-Gun Sensor is an electronic siren. Connect a cable

between the Auxilliary Start input on the timing module and the Start-Gun

Sensor. After connecting this device it is important to press the RED button

once to stop the red LED flashing and to reset the device for Electronic Siren

operation.

This siren connects to the same input as was used with the microphone, and is

used to generate an audible starting signal for the athlete. Pressing the RED

button will result in a loud squeal and a simultaneous start signal being sent to

the Timing module.

Thumb Switch operation

By plugging the supplied double-adaptor into the Start-gun Sensor and then

connecting this into your ‘daisy chain’ of Timing Gates, the RED button can be

Содержание SPEED LIGHT
































Результаты поиска

Содержание SPEED LIGHT

Отзывы:

Похожие инструкции для SPEED LIGHT

Бренды по названию

Популярные бренды

Swift Sports SPEED LIGHT, Руководство пользователя

Результаты поиска

Содержание SPEED LIGHT

Отзывы:

Похожие инструкции для SPEED LIGHT

Бренды по названию

Популярные бренды